7 mm x 17 mm x 5 mm ZEN S697 deep groove ball bearings

da min.:76 mm; Reference grease quantity Gref:8.2 cm³; r3,4 min.:0.6 mm; B:20 mm; Calculation factor f2B:1.03; Calculation factor f1:0.99; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) Y2:0.87; d2:81.6 m

Mass bearing + sleeve:0.9 kg; d3:70 mm; d1:45 mm; b:5.5 mm; da max.:60 mm; K:3 mm; B1:42 mm; B:23 mm; Basic static load rating C0:108 kN; B4:12 mm;

Oil Speed Rating Open/Shielded n2:3000 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:143000 N; D:240.0000 mm; B:38.00 mm; d:160.000 mm; Accessories:Without

B:50.00 mm; Fillet Radius ra:1.50 mm; D:130.0000 mm; Fillet Radius rb:1.00 mm; d:75.000 mm; Basic Static Radial Load Rating Co:127000 N; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:119000 N; Oil Speed Rating n2:4300 rpm;

rs (min):1.5 mm; a:32 mm; Oil:6 000 min-1; Pu:2.301 kN; r1s (min):1 mm; Dynamic (Cr):70.120 kN; D:110 mm; d:60 mm; Grease:5 000 min-1; Static (Cor):50.625 kN;

G2:G 1/4; d:630 mm; d1:600 mm; G1:46 mm; B2:272 mm; A:11 mm; B1:258 mm; Mass withdrawal sleeve:88.5 kg; Nut for removal:HM 30/670; Hydraulic nut:HMV 134 E;

Calculation factor f2C:1.05; Calculation factor e:0.68; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; Preload class D GD:7200 N; Calculation factor f2A:1; r1,2 min.:2 mm; Calculation factor f2D:1.08; da min.:139 mm; dn:156.4 mm;

Basic dynamic load rating C:315 kN; l4 max.:349 mm; d2 max.:162 mm; l7 min.:80 mm; Mass rod end:10.5 kg; B:49 mm; l3 min.:80 mm; d4 ≈:92 mm; h1:265 mm; C1 max.:43 mm;

Tolerance shaft:h8; Specific dynamic load factor K:140 N/mm²; Coefficient of friction µ min.:0.03; d:200 mm; Specific static load factor K0:200 N/mm²; Effective load carrying cross section A:35600 mm²; D:220 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Co

Max. speed for Taconite seal:900 r/min; Taconite seal:TER 103; Ca:82.804 mm; Cap bolt:2 x 1-8 UNC; Mass pillow block:45.9 kg; H1:133.35 mm; L:419.1 mm; N1:22.225 mm; J1:69.85 mm; P90°:111 kN;

Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; d:35.000 mm; Grease Speed Rating n1:6000 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:36500 N; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; D:72.0000 mm; Oil Speed Rating n2:8000 rpm;

Basic static load rating C0:140 kN; T:35.25 mm; Ca min.:4 mm; r1,2 min.:2 mm; Dimension series:2FD; a:22.949 mm; Cb min.:8 mm; db min.:49.5 mm; Mass bearing:1.03 kg; rb max.:1.5 mm;

Pa:36.3 kN; H:336.55 mm; Mass pillow block:108 kg; H2:66.675 mm; P180°:94.3 kN; Stabilizing ring:SR-0-26; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 15; Adapter sleeve assembly:SNW 126x4.1/2; R1:104.775 mm;

Speed Rating-Open and Shielded-Grease OSG:6300 rpm; Basic Radial Load Rating-Static SCO:6740 N; Adapter Sleeve AS:SNW11; Basic Radial Load Rating-Dynamic DC:9800 N; Speed Rating-Single and Double Sealed Grease SDG:4300 rpm; D:99.9998 mm; Inside Diameter D:49.2125 mm; Fillet Radius ra:1.50 mm; Speed

B:355 mm; B2 ≈:417 mm; Calculation factor Y2:2.9; da min.:580 mm; K:12 mm; b:22.3 mm; Fatigue load limit Pu:1340 kN; B1:393 mm; d1:530 mm; Basic dynamic load rating C:12366 kN;